It didn't get above 27degF here today and there was a pretty stiff breeze blowing. That's too cold to be standing around outside, watching a pre-heater run, so even if the compass wasn't leaking, I wasn't going flying. Lots of folks must have agreed with me, because I think I heard one small airplane all day.
So I went to the range. I took my 2.5" snubbie .357 and practiced on that a bit.
With .38 Specials, it is an easy gun to shoot. But when it is loaded with .357 125gr hollowpoints, the recoil is a bit stout and the muzzle flash is impressive. It must have had a decent pressure wave, too, for when I fired the first .357 round, the neighboring target flew off its hanger.
I was at a range once when another shooter opened up with a .44 magnum snubbie. I could feel the pressure wave rippling my clothes and I was at least four stations away from the shooter.
I did OK, I guess. I also worked with my .45 on getting off two shots as rapidly as I could. I had a full-sized silhouette target at 25 feet and I missed once, all the rest were well inside the body area. Sometime I ought to try in Magoo Mode, without my spectacles and only with safety glasses, but that could be a bit scary.
Anyway, my continued thanks to Justin Buist, who told me about Slip 2000 gun cleaning stuff. If I still was using Hoppes, I would not have gone shooting again until the weather was warm enough for me to open the windows, because of the stink of the solvent.
Christmas In Retail Isn’t Fun For Anyone
1 hour ago
2 comments:
A .357 stubbie is one handgun I refuse to subject myself to, at least with .357 ammo. Why put yourself through the discomfort of firing a lightweight short-barrel weapon with a heavy load when you don't need to?
And that's said as someone who in general quite likes .357 revolvers as a good compromise between stopping power and ease of use. But if I'm going to fire a .357 load, I'm going to do it in a revolver with a bit more heft and a bit more barrel to it, not a snubbie. If I need a smaller weapon for concealment purposes or whatever, I'll more likely look at .380 or 9mm automatics rather than .357's, or perhaps a smaller-frame .38 snubbie revolver.
I put one cylinder-full of .357s through it. I haven't fired a 13oz .38, but I suspect the recoil is as bad in one of those.
Post a Comment