A quartet of CL-415s fill up on the French Rivera:
I have no idea what corrosion issues arise from operating on the ocean.
Subscribe to:
Post Comments (Atom)
A blog by a "sucker" and a "loser" who served her country in the Navy.
If you're one of the Covidiots who believe that COVID-19 is "just the flu",
that the 2020 election was stolen, or
especially if you supported the 1/6/21 insurrection,
leave now.
Slava Ukraini!
European Union laws require you to give European Union visitors information about cookies used on your blog. In many cases, these laws also require you to obtain consent.You're here, you've consented. If you don't like it, go read some other goddamn blog. It's not as if you're paying me.
9 comments:
Not sure about the sense in using saltwater, or brackish water, to drop on a fire either.
CP88, seawater will retard plant growth for a while, but not as much as a fire will...
Can only guess. This is the closest water source. The aircraft can be washed and flushed after the fires are under control.
AC2usn
he water sourse
Any idea of the clearance they need when doing that? I mean the distance from 'no water' to 'nose down and dead in the water'? I presume that is about a foot or so.
Just wondering.
w3ski
w3ski,
According to Wikipedia, six feet is the minimum water depth for the CL415.
w3ski, they're not flying precisely x inches above the water with a scoop hanging down: they just land on the water, add some power, and deploy the scoop. As long as the hull is in the "on the step" condition, the drag is modest, the load is supported, and it's easy to take off again. If they should lose an engine and stop, then the hull would sink down to buoyancy level and they'd have to pump some water overboard to get back on the step.
Thanks, that fills out my understanding of it. I pictured them flying say 2 feet above the water.
w3ski
Hopefully they're zinc chromated all over.
The tanks are composite, so no worries there for corrosion. The optional foaming additive that is carried onboard in a small tank to mix with the scooped up water is corrosive anyways. If you're operating a floatplane or amphibian in salt water you wash with de-ionized water at the end of every day.
The CL415 has a system that can automatically retract the scoops when a preselected weight of water has been scooped. Unfortunately it is possible to mess up and overload the airplane which is usually no big deal, gain 3 feet of altitude and dump some water and you're good. There is a good pic of the right probe (scoop) and one of the dump doors in this report
http://www.tsb.gc.ca/eng/rapports-reports/aviation/2013/A13A0075/A13A0075.asp
Al_in_Ottawa
Post a Comment