Sunday, August 30, 2015

Mining the Range, a Followup

(The first post and comments.)

I chatted with one of the range owners recently. His research, at the time he researched and priced out building his range, was that the metal backstop ranges were more than twice as expensive to build. True, collecting and recycling the lead is simpler and doesn't require closing the range down, but it takes a very long time in operation to earn back the initial costs, compared to the costs of mining a rubber range.

Additionally, the metal backstop ranges can have a higher level of airborne lead, which requires larger air-handling systems to deal with. Some designs use an oil-water system to wet down the backstops to reduce the level of airborne lead. But then that fluid becomes hazardous waste.

--------------------------------

A side-by-side comparison between my red-dot Ruger and my open-sighted Model 17 would indicate that on slow-fire, I'm giving up 15 points per relay by using the revolver. I did install the Pachmyer target grips and while they do the job, they certainly are of a cheaper grade than the ones from the `80s.

I had been shooting rapid fire with the first shot single-action and the subsequent ones double action. I think I'll not do that, as if I stay DA throughout, I won't be futzing with repositioning my trigger finger.

No comments:

Post a Comment

House Rules #1, #2 and #6 apply to all comments. Rule #3 also applies to political comments.

In short, don't be a jackass. THIS MEANS YOU!
If you never see your comments posted, see Rule #7.

All comments must be on point and address either the points raised in the blog post or points raised by commenters in response.
Any comments that drift off onto other topics are subject to deletion.

(Please don't feed the trolls.)

中國詞不評論,冒抹除的風險。僅英語。

COMMENT MODERATION IS IN EFFECT UFN. This means that if you are an insulting dick, nobody will ever see it.